Normally we don't provide support during weekends, except for urgent cases. In these cases, you only need to mark “Urgent” in your email, we will get back to you ASAP.
AnswerIf the temperature is not below 23°F (-5°C), the stickers can be applied. But be careful about the quality of the work. If possible, try to do the work in an enclosed and unventilated area.
AnswerVinyl stickers for cars last at least 5 years, and if the car will be stored in the garage - up to 8 years. After 5 years of active use the sticker will begin to change its properties - UV resistance is lost and the elasticity of the material is reduced. This gradually leads to the appearance of bubbles and microcracks.
Do not believe those who will convince you that their vinyl sticker remains in perfect condition from 8 years and more.
You can also wash your car with a touchless car wash. But it is better to warn the washers about the accuracy of the work.
To remove a vinyl sticker, you will need a box cutter and some free time. Use the knife to pick up the edge of the film, or the individual lettering, and carefully remove it. If the film was glued a long time ago, you can warm it with a hairdryer. Remains of the glue can be easily removed with White spirit or any mild solvent.
Absolutely! Ideally, your picture should be in vector format or the highest possible resolution. The higher the quality of the original image, the better the quality of the image on the vinyl. Send your layout to our contact email address.
All full-color vinyl stickers are made to order. So try to place your order only when you are absolutely sure that the selected decal will fit your needs in terms of size and subject matter. Returned orders are not re-sold and are destroyed, resulting in overconsumption of materials and increased waste.
AnswerImages are printed with a modern Roland DG eco-solvent printer on high-quality roll vinyl of the following brands - FDC and 3M. These vinyl brands are water-resistant and fade-resistant for at least 5 years.
To protect the printed image, we apply application tape to the image, which is removed from the vinyl as it is installed on the surface.